SITE SEARCH:
video overview
ADS

IIr Associates, Inc.
Publisher of The Virginia Engineer

Print-Publishing Services
Web Site Design-Coding-Hosting
Business Consulting

Phone: (804) 779-3527
sales@iirassoc.com
iirassoc.com

NEWS
Super-Hydrophobic Surface Developed
October 11, 2018

Engineers at the University of California San Diego have developed a super-hydrophobic surface that can be used to generate electrical voltage. When salt water flows over this specially patterned surface, it can produce at least 50 millivolts. The proof-of-concept work could lead to the development of new power sources for lab-on-a-chip platforms and other microfluidics devices. It could someday be extended to energy harvesting methods in water desalination plants, researchers said.


SEM images of the super-hydrophobic surface. Credit: Fan et al./Nature Communications.

A team of researchers led by Prab Bandaru, a professor of mechanical and aerospace engineering at the UC San Diego Jacobs School of Engineering, and first author Bei Fan, a graduate student in Prof. Bandaru’s research group, recently published their work, “Enhanced voltage generation through electrolyte flow on liquid filled surfaces,” in Nature Communications.

According to information, the main idea behind this work is to create electrical voltage by moving ions over a charged surface. And the faster you can move these ions, the more voltage you can generate, explained Prof. Bandaru.

Prof. Bandaru’s team created a surface so hydrophobic that it enables water (and any ions it carries) to flow faster when passing over. The surface also holds a negative charge, so a rapid flow of positive ions in salt water with respect to this negatively charged surface results in an electrical potential difference, creating an electrical voltage.

The surface was made by etching tiny ridges into a silicon substrate and then filling the ridges with oil (such as synthetic motor oil used for lubrication). In tests, dilute salt water was transported by syringe pump over the surface in a microfluidic channel, and then the voltage was measured across the ends of the channel.

There have been previous reports on super-hydrophobic, or so-called “lotus leaf” surfaces designed to speed up fluid flow at the surface. However, these surfaces have so far been patterned with tiny air pockets—and since air does not hold charge, the result is a smaller electric potential difference and thus, a smaller voltage. By replacing air with a liquid like synthetic oil—which holds charge and won’t mix with salt water—Prof. Bandaru and Fan created a surface that produces at least 50 percent more electrical voltage than previous designs. According to Prof. Bandaru, higher voltages may also be obtained through faster liquid velocities and narrower and longer channels.

This work was supported by the National Science Foundation (CMMI 1246800 and CBET 1606192).


  ------   News Item Archive  -----  
 
 
The Virginia Engineer MobileOur Mobile site
m.vaeng.com
The Virginia Engineer on facebook
The Virginia Engineer RSS Feed